The BLOBEL Doorway Spill Barrier BL/BED-PM is our most commonly used and most robust automatic spill barrier. The Spill Barrier system is usually tied in to the fire alarm or sprinkler flow. As soon as one of these activates, the spill barriers closes fully automatically. In addition to this, the Doorway Spill Barrier can also be closed through a push button. If required, spill sensors are also available.

The BLOBEL Doorway Spill Barrier BL/BDD-PM is ideal for areas with a low room or door height. Due to it's special design it accommodates this need. The Spill Barrier system is usually tied in to the fire alarm or sprinkler flow. As soon as one of these activates, the spill barriers closes fully automatically. In addition to this, the Doorway Spill Barrier can also be closed through a push button. If required, spill sensors are also available

 
 
 
 

BLOBEL Spill and Containment Barriers for Loading Docks

Our Spill and Containment Barriers are the ideal solution for Loading

Docks. The barrier easily integrate and day to

day operations are no affected. 

The BL-BED, a stationary spill and retention barrier system, is designed to contain spillages, contaminated fire fighting water and fire suppressant foam. 

A compressible, highly adaptable special seal is affixed to the lower side and end faces, enabling sealing of crack free surfaces with up to 20 mm (± 10 mm) of floor/ground unevenness. Concrete, corrugated sheet metal, tiles, stones, etc are handled with ease.  The standard retention height can vary form 150 – 500 mm. 

Typical sites of installation are warehouses, storage areas and production facilities. In the event of an emergency, doors, gates and passageways are sealed and containment is thus ensured. 

At the cutting edge is our sealing technology based on a very flexible, highly chemical-resistant and flame-retardant foam material and our overall demands placed on safety. The barrier can be installed without any restriction in any fireproof zone.


 
 
 
 

BLOBEL Spill and Retention Barrier BL/BED-PM2

The BLOBEL Containment Barriers are ideal to contain contaminated sprinkler water, fire suppressant foam and spills. Systems can be activated by the push of a button or fully automatically being tied in to Fire Control and Sprinkler Flow. 

In addition to this, BLOBEL Spill and Retention Barriers can be activated by spill sensors. 

Spill and Containment Barrier BL/BDD-U-PM

The ideal containment solution for loading docks.

- No intrusion

- Space saving

- Automatic containment

- No floor work necessary

- Does not impede day to day activity

 
 
 
 

Foam Test with BL/BED-PM Spill and Retention Barriers

- automatic closing

- easy testing

- multiple testing

- above the floor installation

- reliable 

Containment of contaminated sprinkler water, fire suppressant foam and spills.